Radio control airplanes, rccskj, 4106 BEC servo power distribution box 20A

BEC 20A Servo power box from Rccsjk

Product features:

 Dual batteries power inputs for security and ample current supply.

 Supplied with Built-in electronic switch and conventional switch, that insures power supply in the event of failure of the mechanical switch.

HD OLED screen, displaying input voltage, receiver and servos operating voltage, plus CDI battery voltage.

From the integrated memory, information of single flight time and total flight can be displayed.

You can set the alarm for input battery voltage, CDI-battery voltage (alarm value range: 4-12V), indicated by a buzzer tone and an external Led.

9-channel inputs, with 16 servo outputs, channel 9 controls the CDI ON-OFF condition by a switch from your radio, so there is no need to use an extra kill-switch for your gas engine

Built-in 20A BEC (Max: 30A), providing ample current for the servos.

4.8-9.7V adjustable output voltage, to adapt to a variety of high and low voltage receivers and servos. Voltage can be adjusted with precision from the regulator on the side with the supplied screw driver.

Dedicated receiver’s position on the board with double face tape, avoiding accidental movement and vibration.

Technical information

Input Voltage:  7-13V

 Output voltage: regulated from 4.8-9 .7 V (factory preset voltage is 5.2V)

Output Current:  0-20A (Max: 30A)

Weight:  80g

Size: 122mm*72mm*18mm

Working temperature: -20℃ to 85℃